The ready-made garments usually include two neat stitches on the necklines, hems, sleeves, and cuffs. The majority of them are performed using a cover-stitch machine. It could have been done using the serger machine.

This amazing, professional and satisfying look can be achieved with two needles.

The look of knit clothes is professional when you put in two stitches. When stitching the single needle two times, it cannot be easy to make two straight lines evenly placed throughout.

Two seams next to each one at the distance you decide to make are made with a double needle.

Table of Contents:

Pre-Requisites For Using A Double Needle

You might not be allowed to use double needles with all types of the sewing machine. You can use the double needle if your machine supports at least the zig-zag method.

Double Needle

If your sewing machine can operate with a double needle, go through the manual to find instructions on threading to determine the exact size of the double needle that can fit inside it.

A double needle of size four is when the distance between the eyes on the needles is four millimeters. If there’s no information in the manual regarding the size, the most effective method of finding it is to follow the following steps.

Take a piece of scrap paper or cloth without thread. The longest distance will give you the proper size. Bring the sheet to the store if needed and purchase the appropriate size.

A wrong-size double needle could damage the throat plate, the footplate, and even the case for the bobbin. This is why you should be cautious about the size of the needle.

Thread Spools

You will require two spools of threads. They do not have to be the same color unless you specify them.

If you don’t wish to purchase two spools of threads in the same color but still would like to utilize that same shade, take the bobbin in and make it part of one of those spools.

The process of loading the bobbin is simple. Utilize a stick to hold the bobbin less tightly. Keep the thread’s end using one hand while holding the stick in the second. The sewing machine should run, and the thread should slide on the bobbin.

Spool Holders

There are two holders for spools to accommodate two thread spools. This option is available on the majority of machines. However, there are other options if your machine does not have two holders for spools.

You can put both two spools in a single frame. However, they could get caught and cause problems.

Using your bobbin’s winder shaft to make some of these spools is possible. You can also move the overlock to a point where you can use its spool.

To make a spool holder cut off a piece of dowel. You must ensure that you cut the right length for the dowel. Enough to accommodate the thread spool. Place the dowel in the corner of the machine at a sufficient height to allow the spool of thread to rotate.

Footplate

Be sure that the double needle can pass across the footplate. Be cautious when using the zig-zag foot presser when you don’t have the correct foot plate with a wide enough opening to accommodate both needles.

The zig-zag presser’s foot is designed with an extremely wide mouth that allows the needle can move forward and back easily.

Once you have these, you’re positioned to turn the wheels to create double stitches that make the garment appear similar to the clothes you buy from stores.

Threading The Double Needle

Replace your normal needle with a double needle. There is no other procedure. It’s just a normal needle change procedure that is sufficient. Double needles have the top of the post, with two needles inserted.

The top post should be placed securely into the needle. Make sure to screw it in when the top piece goes as far as it will.

Use the standard upper thread and the needle’s left eye to thread in the normal method. To thread the thread on the second spool, there are two options.

You can choose not to pass this thread by passing it through the needle bar, putting the needle bar between the 2 ends of threads together, and then thread them as if they were one thread, and end up separating the thread before passing them through the eyes of needles.

If your sewing machine has a double needle, it will have two holes on opposite sides of the needle’s point. Two threads are inserted in both holes before making it through the eyelets of the double needle.

Stitching With The Double Needle

You can make all needed adjustments, such as the length of the stitch, just like you would in normal stitching. Put the fabric on the right side facing up while stitching.

This side is lined with two perfectly straight and parallel stitch lines. An equilateral zig-zag pattern characterizes the reverse side.

Advantages Of Double Stitching

Double-needle stitching using a small amount of stitch length helps to avoid the knit fabric and ensures that it doesn’t pull on the material too tightly. It also gives a bit of stretch to the fabric, which is beneficial, especially for knit garments.

In addition to the high quality pre-made stitching style, it is also a great choice for an embellishment stitch. In stitching, two straight lines parallel to each other can add a glamorous appearance to the edges.

It does not require sergers or other special stitching techniques to create the final appearance. Beginners can try their hand at waste cloths and experiment with different designs using this double needle.

It is suitable to create bags for quilting, bags, or hot sewing pads, which require two straight lines. It’s as simple as regular stitching, but with only minor modifications to get it ready to stitch.

A double needle on your sewing machine provides the satisfaction of making your own with ready-made finishing quality. With its many benefits, the double needle should have caught your eye.

I hope this article will serve to provide some helpful tips on how to use the double needle. Enjoy yourself when stitching.

See Also: