The sewing machines are complicated for those who used them in the past or don’t have the necessary knowledge to operate them. Nevertheless, people must be aware of the operation of the sewing machine’s functions because it makes their daily life much more comfortable and easy and can help save dollars.

People who take a be interested in designing fashionable clothes can design amazing textile designs.

In this article, we will look at the operating aspects of the sewing machine step by stage so that you will learn the skills needed to create your clothing.

See Also:

Best Sewing Machine for Advanced Sewers

Table of Contents:

Ways to Use an Electric Sewing Machine

We’ve gone over the procedure chronologically in the next discussion. So, let’s take a look at these:

Find out more about the various Parts of a Sewing Machine.

You first need to locate how to turn off the electricity. This is the most critical stage in the entire process. If you don’t figure out where the button is, it won’t be possible even to begin the machine.

It can be found in various locations depending on the type of machine. However, in most instances, you’ll find it on the right-hand side of the device’s body.

Spool Pin Identification

The next step is to identify the pin that is spooling. Many have trouble finding the spool pin since it’s a tiny metal or plastic pin. It attaches on the top of the machine. The spool pin holds the thread spool. It might not be easy to find it initially, but after you locate it then, it’s easier to find and reuse it next time.

Thread Guide

It’s a sculptural metal piece of metal. It is attached to the machine’s top. It is located on the left. It guides the thread to the spool and towards the bobbin winder. It is essential to know about the thread guide since it will not function when you cannot locate it. Learn how to put the thread onto the machine.

Find out the Bobbin Winder

You’ll find another smaller metal or plastic pin to the right of the spool and above the machine. It’s located just behind a small horizontal wheel. There is a bobbin winder and a stopper for a bobbin winder. They combine to wind the thread on the bobbin before commencing sewing.

Stitch Adjustment Button

The adjustment buttons are found at different locations on various devices. However, they are simple to locate since they are regulators inside the light or fan. There is an adjustable wheel that has numbers. By using the wheel or the button, one can easily choose the kind of stitch one would like to stitch.

You can set the length and kind of stitch, too. Changing your stitch’s direction towards the front or back is also easy. To understand the function of every button, you’ll be required to consult the user instructions that come along with the machine. If you have any issues with adjusting the buttons, seek professional assistance.

Thread Take-up Lever

To thread the machine, you need to wrap your thread using the spool at the top, through the thread guide, and round the lever that takes up the thread. The lever to take up threads is on the front of your machine. Some arrows and numbers are encrypted, guiding you on how to thread the machine.

Tension Dial

Nearby to that lever (Take-up), You will discover a small wheel with a number known as”torque dial. It is essential to regulate your thread’s tension while you stitch.

A dial for tension is the primary source of tension control on the thread. The thread will be pulled towards the right if this is not done. If the tension is too loose, the thread will be looped at one side of the material.

Needle Clam Screw

It’s also a metallic piece that is attached to the machine. You can find it right over the needle. It is where the needle used to sew the garment is done. It’s like a large nail. It extends on the right side of the needle.

When using the screw, you’ll be required to tighten the needle to ensure that the needle will not become free. If it does, it isn’t easy to achieve perfect sewing.

Securing the needle to ensure that it cannot shift left or right when sewing is recommended. When the screw for your needle isn’t properly set, it could cause the needle to break during the operation.

Presser Foot

It’s a small metal lying below the screw for clamping needles. It resembles a small ski. As the process begins, it holds the fabric in place and directs it along the proper channels in the machine. It will also help you manage the fabric in the course of sewing. It is not a feature of traditional sewing machines.

Presser Foot Lever

The operator of the sewing machine must discover the lever for pressing feet. They must learn to raise and lower the foot of the presser. The user must shift it either way. It’s a lever on the left or right side of the assembly of needles.

Look for the Needle Plate

It is generally composed of silver. It is situated under the needle. The machine operator will be able to find it below the needle. You’ll need to place your fabric in the machine to sew.

Therefore, operating an electric sewing machine is simple, provided you are aware of the procedures involved. The more you can practice sewing, the better you’ll become over time.